CAMS.NET RSS Feed

Cutting Corners

CAMS.NET — Fri, 20 Aug 2010 08:58:49 GMT

SolidWorks and CAMWorks pair up to provide Western Saw the edge when it comes to cutting corner openings out of concrete walls, while maintaining structural strength.
Read More...

CAMWorks 2010 SP1.2 is available for download

CAMS.NET — Thu, 05 Aug 2010 10:18:41 GMT

The 32-bit and 64-bit versions of CAMWorks 2010 SP1.2 are now available for download at: www.camworks.com (login required). Please read the associated notes prior to download and installation.

CAMWorks Solids SP 4.0.4 is available for download

CAMS.NET — Tue, 27 Jul 2010 08:11:36 GMT

The 32-bit and 64-bit versions of CAMWorks Solids 2010 SP4.0.4 are now available for download on the CAMWorks Solids page at www.camworks.com(login required). The authorized license date for CAMWorks Solids 2010 SP4.0.4 is 20091101. Your current CAMWorks license must be the same as or later than this date.

CAMWorks 2009 SP3.2 offers Windows 7 support

CAMS.NET — Fri, 28 May 2010 09:13:39 GMT

The 32-bit and 64-bit versions of CAMWorks 2009 SP3.2 are now available for download at: www.camworks.com (login required). Please note: CAMWorks 2009 SP2.2 or higher is REQUIRED for SolidWorks 2010 compatibility.

Important Notice!

CAMS.NET — Mon, 16 Nov 2009 13:58:45 GMT

CAMS, Inc. strives to provide CAMWorks technical support in a professional and timely manner. In doing so, we utilize mass email for distributing information applicable to large portions of our user group. A important technical bulletin was distributed 11/19/2009 regarding CAMWorks 2010. If you did not receive this bulletin, please ensure that all emails from the "cutmetalfast.com" domain are white-listed within your security or email defender software. Also, email addresses change from time to time so please be sure you have an accurate email on file with our support staff. To update your email information, or be added to the distribution list as a new user, please complete Technical Support Inquiry Form on the FAQ page.

To Comp or Not to Comp....That is the Question

CAMS.NET — Fri, 24 Apr 2009 11:24:07 GMT

Many CAMWorks users have recently asked questions about Toolpath Center Compensation and whether or not to run with it or without it. At CAMS, we strongly recommend taking advantage of CAMWorks Toolpath Center Compensation functionality. One of the main benefits of a CAM system is the ability to display, simulate, and evaluate toolpath prior to machine movement. Take full advantage of this benefit; alleviate considerable confusion for the user while also ensuring on-screen display represents the output code.